Control Panel - Stanley Alpha 150K User Instructions

FIG. 6
HEATING
To use this appliance for heating and domestic hot water, first ensure power is switched on. Set the timer to call for heat
and set the desired water temperature. The boiler will now commence firing and heat the water to the desired temperature.
If the burner re-set button becomes illuminated then refer to section 'BURNER RE-SET' - PAGE 14.
COOKING
To use this appliance for cooking ensure power is switched on. For manual operation, move the cooker switch to the
MANUAL PROGRAMME position, and set the cooker control thermostat to desired temperature. The burner will
commence firing, until the desired temperature has been reached, at which time the cooker temperature indicator will
illuminate. If burner re-set button becomes illuminated then refer to section 'BURNER RE-SET' - PAGE 14.
For automatic operation, set timer to desired operating times. Ensure AUTO PROGRAMME is selected, set the cooker
control thermostat to the desired cooking temperature, and the cooker will be ready to use when required.

CONTROL PANEL

APPROX
MARK
TEMP
LOW 90ºC
1 140ºC
2 150ºC
3 160ºC
4 180ºC
5 190ºC
6 200ºC
7 220ºC
8 230ºC
9 240ºC
5
DESN 514807