Maintenance Fundamentals - Honda CBR500R 2016 Operation Manual

Maintenance Fundamentals

Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tire, can be a major inconvenience.
Check the following items before you get on
your motorcycle:
●
Tire tread wear and air pressures are within
limits. P. 55
2
● Lights, horn, and turn signals operate
normally.
●
Check the condition of the drive chain.
Adjust slack and lubricate as needed.
Check the following items if you are carrying
a passenger or cargo:
●
Combined weight is within load limits.
P. 128
2
●
Cargo is secured properly.
●
Suspension is adjusted to suit load.
P. 86, 87
2
Check the following items after you get on
your motorcycle:
●
Throttle action moves smoothly without
binding.
●
Brake lever and pedal operate normally.
●
Check the fuel level and refuel when
needed.
●
Engine stop switch functions properly.
P. 32
2
Check the following items at regular intervals:
●
Oil level is between the upper and lower
level marks.
P. 52
2
●
Brake fluid level is
Front:above the LWR mark.
Rear:between the UPPER and LOWER level
marks.
2
●
Engine coolant level is between the UPPER
and LOWER level marks.
●
Side stand functions properly.
P. 82
2
P. 13, 36
2
P. 64
2
P. 71
P. 69
2
P. 35, 74
2
45