Honda CBR500R 2016 Operation Manual page 101

6. Remove the rear axle shaft, washer,
brake caliper bracket, rear wheel and
side collars.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc to pad surfaces.
u Do not push the brake pedal while the
wheel is removed.
Tire Puncture
Installation
1. To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
Removing Wheels
u
continued 99