Honda CBR500R 2016 Operation Manual page 97

CBR500RA only
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Place on a firm, level surface.
2. Cover the right side of the front wheel
and brake caliper with protective tape or
cloth.
3. On the right side, remove the mounting
bolts and brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not pull the front brake lever while
the brake caliper is removed.
Tire Puncture
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
Tape or cloth
Brake caliper
Wheel speed sensor
CBR500RA only
Removing Wheels
u
Mounting
bolts
Right side
collar
Pulser ring
CBR500RA only
continued 95