KTM 125 Duke 2018 Owner's Manual page 151

–
Clean the thread of the wheel spindle and screw
–
Clean and grease wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed
sensor holder
–
Mount and tighten screws
Guideline
F00754-11
Screw, front fender
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Take the motorcycle off the front lifting gear. (
WHEELS, TIRES 14
2
p. 238)
2
.
M8 25 Nm (18.4 lbf ft)
3 in the drill hole.
4
.
M6 8 Nm (5.9 lbf ft)
5
with the washers.
M6 7 Nm (5.2 lbf ft)
p. 112)
.
149