KTM 125 Duke 2018 Owner's Manual page 127

–
Check the chain sliding guard for wear.
»
If in area
ble from above:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain slid-
ing guard
F00752-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 109)
SERVICE WORK ON THE CHASSIS 12
C by the chain sliding guard screw
M6
1 is visi-
7 Nm (5.2 lbf ft)
125