11
TUNING THE CHASSIS
(200 XC‑W US, 250 XC‑W US, 300 EXC BR, 300 XC‑W US)
–
Remove screws
lay it to one side.
–
Remove screws
–
Place the handlebar support in the required position. Mount and tighten
screws
Guideline
Screw, handlebar support M10
–
Position the handlebar.
M00993-11
–
Position the handlebar clamps. Mount screws
Guideline
Screw, handlebar clamp
. Take off the handlebar clamps. Remove the handlebar and
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
. Remove the handlebar support.
.
Info
Position the left and right handlebar supports evenly.
Info
Make sure the cables and wiring are positioned correctly.
Info
Make sure the gap widths are even.
40 Nm
Loctite
®
(29.5 lbf ft)
and tighten evenly.
M8
20 Nm
(14.8 lbf ft)
51
243™