Edimax BR-6428nS V4 User Manual page 62

Start IP
End IP
Your device's DHCP server can be configured to assign static (fixed) IP addresses to
specified network devices, identified by their unique MAC address.
Enable Static DHCP
Leases
MAC Address
IP Address
Add
Clear
Delete Selected /
Delete All
The LAN IP page will be displayed as below when your device is
set to access point mode. You can set theBR-6428nS V4 to obtain
an IP address automatically or you can specify an IP address.
Enter the start IP address for the DHCP
server's IP address leases.
Enter the end IP address for the DHCP
server's IP address leases.
Enable/disable static DHCP leases. This must
be enabled in order to assign any network
device a static IP address.
Enter the specified network device's MAC
address here.
Assign a fixed IP address for the specified
network device here.
Add the information to the "Static DHCP
Leases Table".
Clear the MAC address and IP address fields.
Delete selected or all entries from the table.
58