Table of Contents
Advertisement
III-3-9-4. Backup/Restore
Backup Settings
Restore Settings
Restore to
Factory Default
III-3-9-5. Upgrade
The upgrade page allows you to upgrade the system firmware to a more
recent version. You can download the latest firmware from the Edimax
website. After the upgrade, the system will restart.
Do not switch off or disconnect the device during a firmware
upgrade, as this could damage the device. It is recommended that
you use a wired Ethernet connection for a firmware upgrade.
Click "Save" to save the current settings on your
computer as config.bin file.
Click "Browse" to find a previously saved
config.bin file and then click "Upload" to replace
your current settings.
Click "Reset" to restore settings to the factory
default. A pop-up window will appear and ask
you to confirm and enter your log in details.
Enter your username and password and click
"Ok". See below for more information.
101
Advertisement
Table of Contents
