Table of Contents
Advertisement
INSTALLATION (continued)
BASE ASSEMBLY
Prior to assembling the base, locate it as close to the
finial position as possible. Then follow these steps.
1.
Align the two rear panels (Fig 1) and secure with a
bolt, washer and nut (8 places).
2.
Place the Base Bottom Stiffener (N1-Z15330) to the
bottom of the two rear panels and secure with bolt,
washer and nut (8 places).
3.
Align the left and right side of the base to the rear
panel (Fig 2) and secure with bolt, washer and nut
(8 places each side).
4.
Align the rear corner brackets in place (Fig 3) and
secure with bolt, washer and nut
(4 places each bracket).
5.
Install the 6" adjustable legs and secure in place with
the bolt provided.
Hardware Provided
Nut; 2C-6517
Washer; 2C-A27469
Bolt; 2C-Z5555
p/n: N1-Z14159
10
t
o n
F r
IL2977
Bottom Stiffener
Figure 1
t
o n
F r
Figure 2
Corner Bracket
6" Adj. Legs
Figure 3
IL2387
IL2388
p/n: N1-Z14158
IL2389
Advertisement
Table of Contents
