Lexus LC 500 2024 Owner's Manual, Quick Manual page 94

Enabling 2-way communication with a garage door (only available for compat-
■
ible devices)
When enabled, 2-way communication allows you to check the status of the opening and
closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used is a compati-
ble device. (To check device compatibility, refer to www.homelink.com.)
1
Within 5 seconds after programming the garage door opener has been completed, if
the garage door opener motor is trained to HomeLink
indicators will flash rapidly (green) and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
button after programming has been completed.
2
Press a programmed HomeLink
3
Within 1 minute of pressing the HomeLink
has stopped, press the "Learn" or "Smart" button on the garage door opener motor.
Within 5 seconds of the establishment of 2-way communication with the garage door
opener, both garage door operation indicators in the vehicle will flash rapidly (green)
and the light on the garage door opener motor will blink twice, indicating that 2-way
communication is enabled.
Reprogramming a single HomeLink
■
When the following procedure is performed, buttons which already have devices registered
to them can be overwritten:
1
With one hand, press and hold the desired HomeLink
2
When the HomeLink
®
HomeLink
for the HomeLink
Operating HomeLink
Press the appropriate HomeLink
93
®
®
indicator starts flashing (orange), continue to hold the
button and perform "Programming HomeLink
®
indicator to start flashing).
®
®
button. The HomeLink
2 3
and within the first 10 presses of the HomeLink
button to operate a garage door.
®
button, after the garage door operation
®
button
®
, both garage door operation
®
button.
®
1
" (it takes 20 seconds
®
indicator light should turn on.
®