Setting the vehicle speed (vehicle-to-vehicle distance control mode)
1
Press the cruise control main switch to
activate the cruise control.
Dynamic radar cruise control indica-
tor will come on and a message will be
displayed on the multi-information dis-
play. Press the switch again to deacti-
vate the cruise control.
If the cruise control main switch is
pressed and held for 1.5 seconds or
more, the system turns on in constant
speed control mode. (P.51)
2
Accelerate or decelerate, with accelera-
tor pedal operation, to the desired vehi-
cle speed (at or above approximately
20 mph [30 km/h]) and press the "-
SET" switch to set the speed.
Cruise control "SET" indicator will
come on.
The vehicle speed at the moment the
switch is released becomes the set
speed.
48