Lexus LC 500 2024 Owner's Manual, Quick Manual page 92

Programming HomeLink
■
1
Steps through
stop flashing and programming will not be able to be completed.
1
Press and release the HomeLink
®
HomeLink
 Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the remote control transmitter button until the HomeLink
changes from slowly flashing orange to rapidly flashing green (rolling code) or continuously
lit green (fixed code), then release the button.
 Programming an entry gate (for U.S.A. owners)/Programming a device in the Cana-
dian market
Press and release the remote control transmitter button at 2 second intervals, repeatedly,
until the HomeLink
(green) (rolling code) or continuously lit (green) (fixed code).
91
®
3
must be performed within 60 seconds, otherwise the indicator light will
indicator light flashes (orange).
®
indicator light changes from slowly flashing (orange) to rapidly flashing
®
button you want to program and check that the
2
Point the remote control transmitter
for the device at the rear view mirror,
1 to 3 in. (25 to 75 mm) from the
HomeLink
Keep the HomeLink
view while programming.
3
Program a device.
®
buttons.
®
indicator light in
®
indicator light