Installing the expansion card
1
Insert the expansion card in the connector on the system board and press down until secured.
2
Push the metal card-retention latch back to its position.
3
Tighten the screw (6-32xL6.35) that secures the metal card-retention latch to the computer.
4
Install the cover.
5
Follow the procedure in
Coin cell battery
Removing the coin cell battery
1
Follow the procedure in
2
Remove the cover.
3
To remove the coin cell battery:
a
Press the release latch away from the battery to allow the battery to pop-up from the socket.
b Lift the coin-cell battery out of the computer.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
19