Ip Filter - D-Link DWR-933 User Manual

Section 3 - Configuration

IP Filter

The DWR-933 can filter certain IP addresses and ports. IP filtering allows you to direct specific traffic to a specified local client based on source IP
address or protocol. The DWR-933 supports a maximum of 50 filters.
Click Add New to add a new filtering rule.
ID
ID number given to new IP filters.
Delete
Click here to select the filters you wish to delete.
Protocol
The protocol for the IP filter rule.
Source IP
The source IP address to be filtered.
Dest IP The destination IP address to be filtered.
Click Add New to add a new rule
Click Apply to save changes.
D-Link DWR-933 User Manual 41