Installation; Initial Setup - D-Link DWR-933 User Manual

Section 2 - Installation

Installation

This section will guide you through the installation process.

Initial Setup

1. Lift off the back cover by using the notch on the bottom.
2. Remove the battery using the notch along the top edge of the battery bay
3. Slide the micro-SIM card bracket to the left until it clicks to unlock it, then lift it
open. Place your micro-SIM card in the tray with the notch situated at the top-right,
SIM
then close the bracket and slide it to the right until it clicks to lock it in place.
4. If you want to insert a microSD card, push the microSD card bracket down until it clicks,
then lift it open. Place the microSD card in the indentation, then close the bracket and slide it
SD
up until it clicks to lock it in place.
5. Reinsert the battery and reattach the battery cover.
6. Connect the USB cable and plug it into the USB port of a power adapter or a PC to charge
the battery
D-Link DWR-933 User Manual 7