Lcd Display; Fw Version; Wifi 2.4G; Name: Dwr-933_Xxxxxx - D-Link DWR-933 User Manual

Section 1 - Product Overview
When you turn on the DWR-933, the D-Link logo will appear while the device is booting, then the home screen will appear. After a few seconds of
inactivity the screen will power off. To wake up the display, press the Power Button ( ) or WPS Button
Press the Power ( ) Button to cycle through the WiFi 2.4G, WiFi 5G, and Firmware information screens.

FW Version:

01.00.EU

WiFi 2.4G

Name: DWR-933_xxxxxx

KEY: xxxxxxxxxxx

WiFi 5G

Name: DWR-933_xxxxxx
KEY: xxxxxxxxxxx
D-Link DWR-933 User Manual
Hardware Overview

LCD Display

Signal/ Internet
Network Status
Roaming
FW Version: Indicates your device's current FW version.
By default, the network name (SSID) of the DWR-933 will
be in the format dlink_DWR-933_xxxxxx, where "xxxxxx"
Name:
represents the last four characters of the DWR-933's MAC
address.
Key: The password required to join the above network.
By default, the network name (SSID) of the DWR-933 will
be in the format dlink_DWR-933_xxxxxx, where "xxxxxx"
Wireless Network SSID 2:
represents the last four characters of the DWR-933's MAC
address.
Key: The password required to join the above network.
.
WPS Pairing Auto/Manual
Status Connection
Mobile Network Provider
# Connected Clients 2.4 GHz
Firmware Version
WiFi 2.4G
WiFi 5G
SIM Card Battery
Status/SMS Status
# Connected Clients 5 GHz
6