5.11 Software Update - Philips 52PFL9432D User Manual

2670.2 aus -AL 09-10-2007

5.11 Software update

Philips continuously tries to improve its products. It
may be recommended for you to update the TV's
software. To update your TV software you need a
USB Memory device (not supplied).
rNote
The device must have at least 48Mb free space.
Make sure the write protection is turned off.
Some USB devices do not work with our TV.
Contact your dealer.
5.11.1 Update assistant
The Update assistant helps you to update the TV's
software.
TV identification
The TV will identify itself to your USB memory
device.
‡ Switch the TV on.
® Press Menu.
Ò Press navigation key right.
† Press navigation key up down to select
Software update.
º Press navigation key right.
TV menu Software update
TV settings Current software...
Features Update assistant
Installation Local updates
Announcement
Software update
◊Press navigation key up down to select Update
assistant.
‹Press navigation key right.
≈Press
to activate.
OK
Ú Insert a USB memory device to the USB
connector at the side of the TV.
The main menu appears.
œ Press the green key to proceed.
A message appears the TV has successfully
written the identification file to the USB
memory device.
π Press the green key again to finish.
Y Remove the USB memory device from the TV.
Use more of your TV
11:03 Pagina 29
5.11.2 Software download from the PC
‡ Insert the USB memory device into a PC linked
® Locate and open the file "update.htm" on your
Ò Read the instructions on screen and click on
† Remove the USB memory device from your
5.11.3 Transfer of the downloaded
The downloaded software on the USB memory
device must now be uploaded to your TV.
ç Caution
• Do not remove the USB memory device during
the software update.
• If a power drop occurs during the update, do not
remove the USB memory device from the TV.
The TV will continue the update as soon as the
power comes back.
‡ Insert the USB memory device to the USB
® The TV switches off. The screen stays black for
to the USB device
to the internet.
USB device.
the Send ID button.
The software update is downloaded on the
USB memory device.
PC.
software update to the TV
connector at the side of the TV.
U S B
about 10 seconds. Wait and do not use the
power switch B on the TV.
U S B
29