Ricoh RMY-P1 Field Service Manual page 107

Vertical: Plain Paper
Amount of Paper
Buckle at the
Vertical: Thick Paper
Registration Roller:
Duplex Tray
Vertical: Thin Paper
Plain Paper
Thick Paper 1
Thin Paper
Envelope
Fusing Postcard
Temperature
Thick Paper 2
Recycled
Standby Mode
Low Power Mode
Displays Jam Counter for each location.
Jam Counter
Total Jam, Tray1 Jam, Bypass Tray Jam, Duplex Jam, Inner Jam, Outer Jam
Print Test Pattern Prints the test pattern.
SC559 Detection [On or Off (Default)]
Auto refill mode
Refill Mode Setting
Pure refill mode
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the fusing temperature for plain paper.
[150 to 190 / 175 (Default) / 5°C/step]
Adjusts the fusing temperature for thick 1 paper.
[160 to 200 / 185 (Default) / 5°C /step]
Adjusts the fusing temperature for thin paper.
[140 to 165 / 150 (Default) / 5°C/step]
Adjusts the fusing temperature for envelope.
[170 to 200 / 200 (Default) / 5°C/step]
Adjusts the fusing temperature for postcard.
[160 to 200 / 185 (Default) / 5°C/step]
Adjusts the fusing temperature for thick 2 paper.
[160 to 200 / 185 (Default) / 5°C/step]
Adjusts the fusing temperature for recycled paper.
[150 to 180 / 160 (Default) / 5°C/step]
Adjusts the fusing temperature in the standby mode.
[120 to 175 / 155 (Default) / 1°C/step]
Adjusts the fusing temperature in the low power
mode.
[80 to 135 / 120 (Default) / 5°C/step]
Do not change this setting (Designed for Factory Use).
Do not change this setting (Designed for Factory Use).
Smart Organizing Monitor
105