Advertisement
Specifications
initial Set up
read the entire iMpOrtant SaFety inFOrMatiOn section
at the beginning of this manual including all text under subheadings therein
before set up or use of this product.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Before air Supply Setup
1. This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
2. Nozzle must be attached to Gun Body before use.
3. Insert short end of Nozzle into Gun Body.
4. Slide the Ring Nut over the Nozzle and thread onto the Gun Body.
5. Hand tighten the Ring Nut. Do not use a tool or pliers to tighten.
Page 6
Max. Air Pressure
Air Inlet
Hopper Capacity
Air Flow
Gun Body
For technical questions, please call 1-888-866-5797.
150 PSI
1/4 IN. ‑ 18 NPT Female
18 OZ.
7 CFM @ 90 PSI
nozzle
ring nut
Item 59490
Advertisement
