Central Machinery bench drill press Owner's Manual
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Power Tool
  5. Central Machinery 13" Bench Drill Press
  6. Owner's manual

Central Machinery bench drill press Owner's Manual

13" bench drill press
Hide thumbs Also See for bench drill press:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
1998 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Advertisement

Table of Contents
loading

Related Manuals for Central Machinery bench drill press

Summary of Contents for Central Machinery bench drill press

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Important Safety Information

    Table of contents Safety ............2 Maintenance ..........12 Specifications ..........6 Parts Lists and Diagrams ......14 Setup ............6 Warranty ............ 16 Operation ............ 9 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Extension Cord

    General Tool Safety Warnings (cont.) 13. DON’T OVERREACH. Keep proper Table A: REcOMMENDED MINIMUM WIRE GAUGE footing and balance at all times. FOR EXTENSION cORDS (120 VOLT) 14. MAINTAIN TOOLS WITH CARE. Keep EXTENSION cORD NAMEpLATE tools sharp and clean for best and safest performance.

  • Page 4: Drill Press Safety Warnings

    Grounding Instructions TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION, READ AND FOLLOW THESE INSTRUcTIONS: 110-120 VAc Grounded Tools: Tools with Three prong plugs 1. In the event of a malfunction or breakdown, 6. Repair or replace damaged or grounding provides a path of least resistance for worn cord immediately.

  • Page 5: Vibration Safety

    Drill press Safety Warnings (cont.) 11. Stay alert, watch what you are doing and use • Lead from lead-based paints common sense when operating a power tool. • Crystalline silica from bricks and cement or other Do not use a power tool while you are tired or masonry products under the influence of drugs, alcohol or medication.
  • Page 6 Specifications Motor power 3/4 HP - 16 speeds ranging from 220 to 3600 RPM Electrical Rating 120VAC, 60Hz, 7.5A, Single-Phase Drill chuck capacity 7/64″ to 5/8″ Spindle Stroke 3-1/8″ Swing 13-1/4″ column Diameter 2- 57/64″ Dry Table 11-1/2″ Diameter Table Slot 1/2″...

  • Page 7: Head To Column

    Table and Support Arm to column 1. Remove the Rack (2B) from the Column (1B) by 5. Firmly secure the Collar (19B) slackening off the Collar Set Screw (11B) and with the Set screw (11B). removing the Collar (19B). The rack is stowed 6.

  • Page 8: Installing The Drive Belts

    Installing the Drive Belts 1. Undo the Belt Tension Locking Knobs (18A) 3. Consult the chart inside the pulley cover on both sides of the head. Turn the Belt (or the Drill Speed chart in this manual), and Tension Lever (19A) clockwise to bring the install the belts in the positions corresponding Motor Pulley (11A) close to the Spindle Pulley to spindle/drill speed required.

  • Page 9: Tool Set Up

    Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 10: Changing Drill Speed

    changing Drill Speed Before changing the speeds, make sure the 3. Consult the chart inside the pulley cover machine is switched OFF and UNPLUGGED. and position the belts on the pulley’s according to the spindle which corresponds 1. Open the pulley cover. to the spindle/drill speed required.

  • Page 11: Workpiece And Work Area Set Up

    Workpiece and Work Area Set Up 1. Designate a work area that is clean and well-lit. 9. FOR SMALL MATERIALS that cannot be clamped The work area must not allow access by children to the table, use a drill press vise. Make sure or pets to prevent distraction and injury.

  • Page 12: Cleaning, Maintenance, And Lubrication

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 13: Troubleshooting

    Troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
  • Page 14 parts Lists and Diagrams pulley and Spindle parts List and Diagram Part # Description Code Part # Description Code “V” Belt M24 1505010 Arbor 1503007 Pulley Nut 1302025 Chuck 1503009A Spindle Pulley 1305009-02 Chuck Key 1503010A Pulley Insert 1302022 Wedge Drift 1503008 Ball Bearing 60203...
  • Page 15 parts List and Diagram A - Head Note: All part numbers shown in this diagram have an “A” suffix Part # Description Code Part # Description Code Head w/pointer and trim 1302001A Feed Handle 1304005 Cable Clamp 1502014A Spindle Feed Shaft 1304002 Pan Head Screw M5x12...

  • Page 16: Limited 90-Day Warranty

    parts List and Diagram B - Base and Table Note: All part numbers shown in this diagram have an “B” suffix Part # Description Code Column 1501003 Rack 1501010 Hex. Socket Screw Set M10x12 Column Support 1501002 Hex. Head Screw M10x40 Base 1301001...

This manual is also suitable for:

38142

Table of Contents