Table of Contents
Advertisement
■
Cleaning method
■
Replacement method
If the filter is dirty, clean by
blowing
through the filter from the
downward side.
Hold the air gun 5 cm (2 in.)
from the filter and blow for
approximately 2 minutes at
500 kPa (5.0 kgf/cm
psi).
If it is not available, have the
filter cleaned by your Toyota
dealer.
Remove the air conditioning
filter and replace it with a new
one.
UP
The "↑UP" marks shown on
the filter should be pointing up.
ITY43C090
4-3. Do-it-yourself maintenance
compressed
air
2
or bar, 72
4
321
Advertisement
Table of Contents
