TeamPoS 3000 XT
7.3.3.
Replacing the CPU
Caution: Be sure to observe all ESD precautions and power off procedures.
To replace the CPU:
1. Remove the AC cord from the back of the terminal.
2. Remove the motherboard as described in section 7.3.1, steps 1 – 6.
3. Disconnect the cable from the fan.
4. Remove the four screws from the heatsink.
Disconnect fan
connector
Remove four screws
7-8
Figure 7-5. Removing the CPU Heatsink
Installation and Maintenance Manual
D900000172