Gigabyte GA-Z87X-UD7 TH User Manual page 86

For the Marvell 88SE9230:
®
Turn off your computer and replace the failed hard drive with a new one. Please note to perform the rebuild,
you must enter the GSATA RAID Configuration menu in BIOS Setup.
Step 1:
Press <Enter> on GSATA RAID Configuration to access the RAID configuration menu. Move the selection
bar to the array to be rebuilt (for example, VD 0: New_VD) and press <Enter> and then select Rebuild. Press
<Enter> again.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Topology
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: ST95005620AS
[Delete]
Free Physical Disks
[Rebuild]
HDD 1: WDC WD1001FALS
Help
Rebuilding with selected physical disk on this array.
ENTER: Operation F10: Exit/Save ESC: Return
Step 2:
The selection bar will move to the new drive. Press the <Space> key to select it and then press <Enter>. When
prompted to confirm, press <Y> to begin the rebuild or <N> to cancel.
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Rebuild->Select free disks
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: ST95005620AS
Free Physical Disks
* HDD 0: WDC WD1001FALS
Rebuild
Do you want to rebuild with selected physical disk on this vd?
Help
Use space bar to select the free disks to be used in the array.
ENTER: Operation SPACE: Select F10: Exit/Save ESC: Return
Configuring SATA Hard Drive(s)
Information
ID :
Name :
Status :
Stripe Size :
RAID Mode :
Size :
BGA Status :
Number of PDs :
Numbers :
Port ID :
PD ID :
Type :
Status :
Size :
Feature Support :
Current Speed :
Model :
Serial :
FW version :
Yes No
- 86 -
0
New_VD
Degrade
64K
RAID1
465.7GB
N/A
1
0
1
1
SATA PD
Unconfigured
931.5GB
NCQ 3Gb/s 48bits
3Gb/s
WDC WD1001FALS-00E3A0
WD-WCATR0035311
05.01D05