Gigabyte GA-Z87X-UD7 TH User Manual page 81

Delete the RAID Array:
To deleted the existing array, select the array on the main menu (example: VD 0: New_VD) and press <Enter>
to display the Delete option. Press <Enter>. When prompted, press <Y> to confirm or <N> to cancel (Figure 8).
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Topology
HBA 0 : Marvell 0
Virtual Disks
New_VD
HDD 0: ST95005620AS
HDD 1: ST95005620AS
Free Physical Disks
Delete Virtual Disk
Do you want to delete this virtual disk?
Help
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
Use the Marvell Storage Utility in the Operating System:
®
With the Marvell Storage utility, you can set up an array or view the current array status in the operating system.
®
To install the utility, insert the motherboard driver disk, then go to Application Software\Install Application
Software and select Marvell Storage Utility to install. Note: After the installation, you must login the utility with
the same account name and password that you use to login the operating system. If you did not set the account
password before, click Login to enter the Marvell
Information
ID : 0
Name : New_VD
Status : Functional
Stripe Size : 64K
RAID Mode : RAID 0
Size : 931.3GB
Yes No
Figure 8
Storage Utility directly.
®
- 81 - Configuring SATA Hard Drive(s)