Gigabyte GA-Z87X-UD7 TH User Manual page 48

& CPU VRIN Protection
Allows you to set the over-current protection level for the CPU VRIN voltage. The adjustable range is from
150.0mV to 500.0mV. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 300.0mV. Auto lets the BIOS automatically configure this setting.
(Default: Auto)
& CPU VRIN Current Protection
Allows you to set the over-current protection level for the CPU VRIN voltage.
Auto
Standard~Extreme
& DDR CH(A/B) Current Protection
Allows you to set the over-current protection level for the memory voltage.
Auto
Standard~Extreme
& CPU VRIN PWM Thermal Protection
Displays the PWM thermal protection threshold for the CPU VRIN area.
& DDR CH(A/B) PWM Thermal Protection
Displays the PWM thermal protection threshold for the Channel A and Channel B memory area.
& CPU VRIN PWM Switch Rate
Displays the CPU VRIN PWM frequency. (Default: Auto)
& DDR CH(A/B) PWM Switch Rate
Displays the current operating PWM frequency for Channel A and Channel B memory. (Default: Auto)
& PWM Phase Control
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levels are (from lowest to highest): eXm Perf (Extreme Performance ), High Perf (High Performance),
Perf (Performance), Balanced, Mid PWR (Mid Power), and Lite PWR (Light Power). Auto lets the BIOS
automatically configure this setting. (Default: Auto)
` CPU Core Voltage Control
This section provides CPU voltage control options.
` Chipset Voltage Control
This section provides Chipset voltage control options.
` DRAM Voltage Control
This section provides memory voltage control options.
BIOS Setup
Lets BIOS automatically configure this setting. (Default)
Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
different level of over-current protection for the CPU VRIN voltage.
Lets BIOS automatically configure this setting. (Default)
Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
different level of over-current protection for the memory voltage.
- 48 -