Advertisement
3.2.2Fault Symptom on GSM-Tester:
3.3Priority:
........ Mandatory
........ Repair
........ Optional
........ Not Yet Defined
3.4Repair Documentation
3.4.1Description of procedure:
3.4.1.1Diagnosis
3.4.1.2Repair by component change
3.4.1.3Repair by SW-Booting
V1.2
This fault cannot be detected with a GSM-Tester
Check the status of the fuse by measuring its resistance with
a multimeter. The fuse is defective if the resistance higher than 10
ohms.
Use soldering iron to remove defective fuse.
Avoid excessive heat!
Watch surrounding components!
Resolder new fuse afterwards.
Not possible!
Page 9 of 22
Information and Communication
Communication Devices
ICP CD ST
D. Schnoor
06/98
Advertisement
