Operation; Use Of The Remote Control - Philips 30PW8859 User Manual

Operation

VCR control buttons
Press to rewind, stop, play, fast forward, or
pause a videotape.
TV VCR ACC
Mode buttons.
Press one of these buttons to use the
remote control in the TV,VCR or in another
accessory device mode.
Does the remote control turn the
device on?
If yes, try other functions on the remote. If
they also work with the device, then the
remote is ready and no other steps are
needed.
When not in TV mode, certain buttons/functions
do not work.
If no, see Setting the remote control to
work accessory devices, p. 26.
PIP buttons: ,
SWAP PIP CH DN
FREEZE
Press to operate Picture-in-Picture function.
See p. 20.
SOUND
Press to select an Auto Surround™ control.
Choose from the factory set controls and a
personal control that you set according to
your own preferences through the on screen
Sound menu.
The factory-set controls will tailor the TV
sound so as to enhance the particular type of
program you are watching.
STATUS/EXIT
Press to see the current channel information
(number) on the TV screen.
Also press to clear the TV screen after
control adjustments.
VOL +/-
Press to adjust the TV sound level.
¬
MUTE
Press to mute the sound.
To restore the sound to its previous level,
press the button again.
CH +/-
Press to select channels in ascending or
descending order.

Use of the remote control

º
Ò
TV
and ,
UP
SWAP
DN
SOUND
STATUS/
EXIT
VOL
1
4
7
TV/VCR
A/CH
POSITION
SOUND
TV/VCR - A/CH
TV/VCR
Press while in VCR mode to view the play back of a tape.
Press again to return to TV mode.
A/CH
Press to alternate between the currently viewed channel and the
previously viewed channel.
POWER
Press to turn the TV on or off.
ACTIVE CONTROL
Measures and corrects all incoming signals in
order to provide the best picture quality
settings.
Press to select the Active Control values On
or Off.
On
POWER
d
Press to freeze the main picture.
‡ π †
The Freeze functionality is not available when a
device is selected connected to
VCR ACC
ACTIVE
PIP CH FREEZE
CONTROL
ê
UP
PICTURE
PICTURE
Press to select an Auto Picture™ control.
Choose from the factory set controls and a
MENU/
SELECT
personal control that you set according to
your own preferences through the on screen
Picture menu.
MUTE
¬
The factory-set controls will tailor the TV
CH
picture so as to enhance the particular type
of program you are watching, or improve the
2 3
picture of a program that has a weak signal.
5 6
MENU/SELECT
8 9
Press for the on screen menu to appear.
0
SURF
Press to return to a higher menu level.
Also press this button to activate your
PIP
choice or to confirm when in the menus.
l
PICTURE
DIGIT BUTTONS
Press the digit buttons to select TV
channels.
Note: For a 2- or 3-digit number, the second
and/or third digit must be entered.
Use of the remote control
: Sharpness and Noise reduction are
controlled automatically.The picture
settings are being adapted continuously
and automatically.The menu items cannot
be selected.
Freeze
AV4
.
7