EMU26013
Choke knob for pull type
To supply the engine with the rich fuel mixture
required to start, pull out this knob.
1
1. Choke knob
EMU26074
Manual starter handle
The manual starter handle is used to crank
and start the engine.
EMU26091
Main switch
The main switch controls the ignition system;
its operation is described below.
"
" (off)
●
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
"
" (on)
●
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
●
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
ZMU07807
EMU26102
Power tilt switch
The power tilt system adjusts the outboard
motor angle in relation to the transom. Push-
ing the switch "
tor up. Pressing the switch "
the outboard motor down. When the switch is
released, the outboard motor will stop in its
current position.
" (off) posi-
TIP:
For instructions on using the power tilt switch,
see pages 46 and 48.
" (on) position,
Components
"
" (start)
" (up) tilts the outboard mo-
" (start) po-
" (on) position.
" (down) tilts
23