Engine Shut-Off Cord (Lanyard) And Clip; Engine Stop Button; Choke Knob For Pull Type; Manual Starter Handle - Yamaha F2.5A Owner's Manual

EMU25994
Engine shut-off cord (lanyard) and
clip
The clip must be attached to the engine shut-
off switch for the engine to run. The cord
should be attached to a secure place on the
operator's clothing, or arm or leg. Should the
operator fall overboard or leave the helm, the
cord will pull out the clip, stopping ignition to
the engine. This will prevent the boat from
running away under power. WARNING! At-
tach the engine shut-off cord to a secure
place on your clothing, or your arm or leg
while operating. Do not attach the cord to
clothing that could tear loose. Do not route
the cord where it could become entangled,
preventing it from functioning. Avoid acci-
dentally pulling the cord during normal
operation. Loss of engine power means
the loss of most steering control. Also,
without engine power, the boat could slow
rapidly. This could cause people and ob-
jects in the boat to be thrown forward.
[EWM00122]
1. Clip
2. Cord
3. Engine shut-off switch
EMU26002

Engine stop button

The engine stop button stops the engine
when the button is pushed.
EMU26012

Choke knob for pull type

To supply the engine with the rich fuel mixture
required to start, pull out this knob.
EMU26073

Manual starter handle

The manual starter handle is used to crank
and start the engine.
Components
16