Download Print this page

Aiphone JK-DVF-XP User Manual page 2

Video door station with standalone prox reader

Advertisement

MOUNTING & INSTALLATION
Installation Location:
Care should be taken when choosing the best
location for mounting the JK-DVF-XP. Do not
install the video door station in any areas
subject to direct sunlight or other strong direct
lighting
conditions;
locations may cause reduced visibility and/or
video quality while viewing from the master
station.
Mounting Height & Viewing Angle: Wide and Zoom Picture
3'5"
Zoom Up
7'5"
2'10"
JK-DVF-XP
4'7"
5'
20"
Zoom Left
JK-DVF-XP
20"
4'7"
Physical Mounting Instructions:
1. JK-DVF-XP – provide wall surface opening for rough-in
backbox (supplied), using dimensions shown (Fig. 1).
Note: if surface mount is required, use the Aiphone
SBX-DVF-P (sold separately) .
2. Connect the 2 conductor wire to
terminals A1 and A2 on back of unit.
3. JK-DVF-XP – Secure the door station to
the backbox using the included security
screws / driver (Fig. 1).
installation
in
such
Wide Up/Down
6'7"
JK-DVF-XP
3'2"
5'
20"
Zoom Center
6'1"
2'4"
3'9"
170° angle of view
JK-DVF-XP
5'
20"
Zoom Center
JK-DVF-XP
20"
3'
Wide Left/Right
JK-DVF-XP
20"
Zoom Down
5'4"
2'10"
2'6"
Zoom Right
JK-DVF-XP
4'7"
1-25/32"
Figure 1
JK-DVF-XP
5'
20"
20"
4-1/2"
8-7/16"
Pg. 2

Advertisement

loading