Problem Areas: Water Resistance
3. If the Charger PAD connector is damaged – replace it.
Run the Water Resistance Test again!
Check:
Inspect the Screw Len:5.0 Diam:1.7 O-Ring.
Action:
1. If not properly assembled – reassemble them.
Do not reuse in case of disassembling!
2. If the Screw Len:5.0 Diam:1.7 O-Ring is damaged or its
gasket is damaged or missing – replace it.
Run the Water Resistance Test again!
Check:
Inspect the Screw Len:2.8 Diam:1.4 O-Ring M.
Action:
1. If not properly assembled – reassemble them.
Do not reuse in case of disassembling!
1267-1086 Rev 2
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
45(72)