Sony Xpreia acro S Working Instructions page 67

Reassembly
Press to secure its position.
Check that if the Caps are securely installed as shown
in picture!
Use an air gun to clean the Cap Micro SD and its hole!
Do not touch the sealing rubber of the Cap Micro SD!
Make sure that the Cap Micro SD is clean and no dirt,
particles and fiber attached on it! Otherwise replace a
new one.
Gently insert the plug of the Cap Micro SD into the socket
with fingers as shown in picture.
Press to secure its position.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
67(76)