Sony Xpreia acro S Working Instructions page 68

Reassembly
Use an air gun to clean the Cap SIM and its hole!
Do not touch the sealing rubber of the Cap SIM!
Make sure that the Cap SIM is clean and no dirt,
particles and fiber attached on it! Otherwise replace a
new one.
Gently insert the plug of the Cap SIM into the socket with
fingers as shown in picture.
Press to secure its position.
Check that if the Caps are securely installed as shown
in picture!
Use an air gun to clean the Charger PAD connector and
its hole!
Do not touch the O-Ring of the Charger PAD connector!
Make sure that the Charger PAD connector is clean and
no dirt, particles and fiber attached on it! Otherwise
replace a new one.
Gently insert the Charger PAD connector into the slot as
shown in picture.
1267-1071 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
68(76)