Advertisement
STEP 5 (See Diagram 5)
A.) Attach the Arm Curl Pad (#28) to the Arm Curl Stand (#9). Secure it with two M8 x 5/8"
Allen Bolts (#64) and Ø 5/8" Washers (#67).
B.) Insert the Arm Curl Stand into the top opening on the Leg Developer Holder. Use a Lock
Knob (#42) to secure the Stand.
C.) Attach the Curl Bar Handle Support (#11) to the bracket on the Leg Developer (#10).
Secure it with a 3" L-shaped Pin (#52). The Leg Developer can be locked when doing Sit
Up exercises. Simply pull the U-shaped Pin out and drop into the hole on the Leg
Developer. Remove the Pin when doing Leg Developer exercises.
D.) Remove the Arm Curl Stand and the Curl Bar Handle when using the Leg Developer.
10
DIAGRAM 5
Advertisement
