Table of Contents
Advertisement
HOW TO INSTALL THE REFRIGERATOR
How to exchange the water purifier filter
(Only applies to internal type filter model.)
How to disassemble the filter
Because the filter is assembled on the top right side of the refrigerator lamp case and it removes the residual
chlorine or odor, exchange a filter once every 6 months.
How to exchange
1. Disassemble the water purifier filter.
- Turn the filter to exchange in counterclockwise
direction by 90 degrees. (1) Pull out the filter to
the front side (2).
- Because water collected in the filter may drip,
put a bowl slightly larger than the size of the filter
underneath the filter when disassembling the
filter.
2. Insert the new filter.
- Align the filter on the indicated line on the control
box (1) and then push it in.
After checking whether the indicated line and the
indicated locking line are aligned, turn the filter in
clockwise direction (2).
- When you have install the filter for the first time
or when you have exchanged the filter, press the
dispenser button once again to dispense the water for about 3 minutes
(or about 1 liter) to remove any air or residual charcoal.
(Charcoal is not hazardous to the human body.)
50
Advertisement
Table of Contents
