Brother MFC-J4440DW Online User's Manual page 583

Level 3 Level 4
Web Connect Proxy Settings
Settings
Network Reset -
Settings > [Print Reports]
Level 3
XMIT Verify
Address Book
Fax Journal
User Settings
Network Config
WLAN Report
Caller ID History Print a list of the available Caller ID information about the last 20 received faxes and
Settings > [Machine Info.]
Level 3
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check
Page Counter
Settings > [Initial Setup]
Level 3
Date & Time
Station ID
Tone/Pulse
(Available only for some
countries.)
Fax Auto Redial
Dial Tone
Phone Line Set
Compatibility
Level 5
Port
User Name
Password
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print a list of your Network settings.
Print the wireless LAN connection results.
telephone calls.
Level 4
Date
Time
Auto Daylight Set the machine to change automatically for Daylight Saving
Time Zone
Fax
Name
-
-
-
-
-
Descriptions
Change the Web connection settings.
Restore all network settings back to the
factory settings.
Descriptions
Check your machine's serial number.
Check your machine's firmware version.
Update your machine to the latest firmware.
View firmware information on the Home screen.
Check the total number of pages the machine has
printed.
Descriptions
Add the date and time on the screen and in the headings of the
faxes you send.
Time.
Set your time zone.
Enter your name and fax number so it appears on each page you
fax.
Select the dialling mode.
Set the machine to redial the last fax number if the fax did not go
through because the line was busy.
Shorten the dial tone detect pause.
Select the telephone line type.
Adjust the equalisation for transmission difficulties.
576