Table of Contents
Advertisement
on a label and place the label on the BladeCenter unit bezel. See the
documentation for your BladeCenter unit for recommended label placement.
Related documentation
Use this information to identify and locate related blade server documentation.
This Installation and User's Guide contains general information about the blade
server, including how to install supported optional devices and how to configure
the blade server. The following documentation is also available:
v Safety Information
v Safety Information Labels
v Warranty Information
v Environmental Notices and User Guide
v Integrated Management Module II User's Guide
v Advanced Management Module Messages Guide
v Advanced Management Module Command-Line Interface Reference Guide
v Advanced Management Module Messages Guide
In addition to the documentation in this library, be sure to review the Planning and
Installation Guide for your BladeCenter unit for information to help you prepare for
system installation and configuration.
To check for updated documentation and technical updates, go to
http://www.ibm.com/supportportal/ .
This document contains translated caution and danger statements. Each caution
and danger statement that appears in the documentation has a number that you
can use to locate the corresponding statement in your language in the Safety
Information document.
This document provides the Simplified Chinese, Mongolian, Tibetan, Uygur, and
Zhuang translated versions of the product safety labels.
This document contains information about the terms of the warranty.
This document contains translated environmental notices.
This document explains how to use the functions of the IMM2 that is installed in
an IBM server. The IMM2 works with IBM UEFI firmware to provide
systems-management capability for System x
This document provides a complete list of all non-device specific events and
recommended actions, sorted by event ID. Device specific event information is in
the documentation for the device.
This document explains how to use the advanced management module
command-line interface (CLI) to directly access the BladeCenter management
functions. The command-line interface also provides access to the text-console
command prompt on each blade server through a Serial over LAN (SOL)
connection.
This document provides a complete list of all non-device-specific events and
recommended actions, sorted by event ID. For event information that is specific
to this blade server, see the Problem Determination and Service Guide for more
information.
®
servers and blade servers.
Chapter 1. Introduction
3
Advertisement
Table of Contents
