Using The App To Check Ypao Measurements And Change Settings - Yamaha R-N800A User Manual

PREPARATION > Automatic adjustment of speaker settings (YPAO)
Using the app to check YPAO measurements and change
settings
You can use the dedicated app "MusicCast Controller" to check the results of YPAO measurements and
change the settings. Use a mobile device with "MusicCast Controller" installed on it to perform these steps.
The screens shown in the following steps are examples when "Living Room" is set to the name of the room in
which this product is installed.
1
Start "MusicCast Controller" on your mobile device(s), select the room in which
this product is installed, and then tap the settings icon.
2
Tap the room in which this product is installed from "Room Settings" on the
Settings screen.
3
Tap "Speaker Setup" under "YPAO" on the room screen (this product).
4
Confirm the YPAO measurement results on the Speaker Settings screen.
You can also change the settings from the Speaker Settings screen.
Item
Speakers
Status
Setting Value or Display
A/B/A+B
No measurement
Measuring...
50
Description
Speaker being used is displayed.
If neither A nor B is selected, the field is blank.
Shown if YPAO has not been run.
Shown while YPAO is making measurements.