Yamaha R-N800A User Manual page 42

PREPARATION > Turning the product ON
"Wireless WAC" Display
The WAC (Wireless Accessory Configuration) function is for applying the wireless settings of an iOS device to another device and
(
wirelessly connecting to the network. The steps for connecting to a network using MusicCast Controller are explained in the
chapter "PREPARATION". Therefore, how to cancel WAC is explained here.
The WAC message is displayed the first time you use the product and after it is initialized.
(
NOTE
It takes several seconds from turning the power ON until audio is played.
(
After turning the power OFF, do not try to turn it ON again for at least 10 seconds. Doing so may generate some noise.
(
Related links
"Making a wireless connection with your iPhone (WAC)" (p.135)
n
Operating the power with the remote control
When the z (Power) Switch on the front panel is ON, the product switches between ON/Standby each time
the z (Power) key on the remote control is pressed.
NOTE
When the product's power is in Standby, to turn the power ON without using the remote control, press the z (Power) Switch to turn it
OFF momentarily, and then press it again to turn it ON again.
42