Advertisement
5.
Installing And Operating An RCCS Control
.
The RCCS (Rotary Current And Contactor Control) is equipped with a 14-pin, 5-pin, or a 6−pin plug for connection to the welding power source.
Contact your local distributor for correct adapter if plug does not mate with receptacle on welding power source.
Increase
1
6.
Installing And Operating An RCC Control
.
The RCC (Rotary Current And Contactor Control) is equipped with a 14-pin, 6-pin, or a 5-pin plug for connection to the welding power source.
Contact your local distributor for correct adapter if plug does not mate with receptacle on welding power source.
5
Decrease
Increase
OM-279860 Page 2
4
3
Decrease
2
1
2
3
!
5
1
2
3
Begin turning actuator in the Increase
direction as shown to close contactor,
and energize the welding power
source. Continue turning actuator to in-
crease current level up to that set on
the welding power source Current Con-
trol.
Turn actuator in the Decrease direction
as shown to reduce the current output
to zero, and turn off the contactor.
Secure control to torch with velcro
straps.
4
5
Connect items to matching receptacle
on welding power source as follows:
align keyway, insert plug, and tighten
threaded collar.
802020-A
!
4
1
2
3
Secure control to torch with velcro
straps.
4
Connect Item 4 to matching receptacle
on welding power source as follows:
align keyway, insert plug, and tighten
threaded collar.
5
Begin turning actuator in the Increase
direction as shown to close contactor,
and energize the welding power
source. Continue turning actuator to in-
crease current level up to that set on
the welding power source Current Con-
trol.
Turn actuator in the Decrease direction
as shown to reduce the current output
to zero, and turn off the contactor.
Be sure remote control is turned
all the way off before turning the
welding power source on or off.
Torch
Hook And Loop Straps
Current And Contactor Control Ac-
tuator
RCCS (Rotary Current And
Contactor Control)
14-Pin, 5-Pin Or 6-Pin Plug
Be sure remote control is turned
all the way off before turning
welding power source on or off.
RCC (Rotary Current And Con-
tactor Control)
Hook And Loop Straps
Torch
14-Pin, 5-Pin Or 6-Pin Plug
Current And Contactor Control
Actuator
Ref. 157463-B
Advertisement
