Specifications - Sony TA-AV581 Operating Instructions Manual

Integrated av amplifier
Hide thumbs Also See for TA-AV581:
Table of Contents

Advertisement

Additional Information

Specifications

Amplifier section
European models:
(FRONT)
DIN power output
100 W + 100 W (at rear/
Continuous RMS power output
120 W + 120 W (at rear/
80 W/ch (at SURROUND
(REAR)
50 W (at front/ center/
(CENTER)
50 W (at front/rear/
(WOOFER)
80 W (at front/rear/center
Other models:
Peak music power output
1900 W (total)
(FRONT)
Continuous RMS power output
100 W + 100 W (at rear/
(REAR)
50 W (at front/ center/
(CENTER)
50 W (at front/rear/
(WOOFER)
80 W (at front/rear/center
Inputs
PHONO (phono jacks):
sensitivity 2.5 mV,
impedance 50 kilohms
CD (phono jacks):
sensitivity 400 mV,
impedance 50 kilohms
TUNER, TAPE, VIDEO1,2 (phono jacks):
sensitivity 250 mV,
impedance 50 kilohms
16
EN
Outputs
TAPE REC OUT, VIDEO 1 (phono jacks):
PHONES (stereo phone jack):
TONE
center/woofer off at
General
1 kHz, 8 ohms)
Power requirements
European, Australian and Singaporean models:
center/woofer off at
Other models:
1 kHz, 10% T.H.D.,
8 ohms)
ON at 1 kHz, 10%
Power consumption
T.H.D., 8 ohms)
AC outlets
woofer off at 1 kHz,
Dimensions(w/h/d)
8 ohms)
Mass
woofer off at
Supplied accessories
1 kHz, 8 ohms)
off at 35 Hz, 4 ohms)
Design and specifications are subject to
change without notice.
center/woofer off at
1 kHz, 10% T.H.D.,
8 ohms)
woofer off at 1 kHz,
8 ohms)
woofer off at 1 kHz,
8 ohms)
off at 40 Hz, 4 ohms)
voltage 250 mV,
impedance 1 kilohms
accepts low and high
impedance headphones
±10 dB at 100 Hz and
10 kHz
230 V AC, 50/60 Hz
110-120 V AC or
220-240 V AC, 50/60 Hz
(adjustable with the
voltage selector)
180 W
3 switched,
total 100 W max.
Approx.
430 x 160 x 355 mm
Approx. 8.5 kg
Remote RM-U581 (1)
Sony SUM-3 (NS)
batteries (2)

Advertisement

Table of Contents
loading

Table of Contents