Table of Contents
Advertisement
SS
SSS
ee
Specifications
Amplifier selection
Continuous RMS power output
{(Coeman
wn
Werman
model)
40 + 40 watts (4 ohms at 1 kHz,
DIN)
48 + 48 watts (4 ohms at 1 kHz,
5 % THD)
(other models)
40 + 40 watts (6 ohms at 1 kHz,
DIN)
50 + 50 watts (6 ohms at 1 kHz,
5 % THD)
Music power output
(German model)
100 + 100 watts (4 ohms at 1
kHz, 10 % THD)
(other models)
85 + 85 watts (6 ohms at 1 kHz,
10 % THD)
Total harmonic distortion
0.01% at rated 15 W 1 kHz
output
Residual noise
Less than 150 pV, 6 ohms,
Network A
Frequency response
PHONO MM (20 Hz - 20 kHz):
RIAA equalization curve +£0.5
dB
TUNER, CD, TAPE, MD, DAT/
VIDEO, ADAPTOR IN: 10 Hz -
50 kHz *{dB
Input sensitivity
PHONO: MM, 2.5 mV, 50
kilohms
TUNER, CD, TAPE, MD, DAT/
VIDEO, ADAPTOR IN: 150
mV, 50 kilohms
Maximum input capability (1 kHz)
PHONO: MM, 150 mV at 1 kHz
S/N (network)
PHONO: 85 dB(A) (SOURCE
DIRECT ON)
CD: 100 dB(A) (GOQURCE
DIRECT ON)
Output voltage impedance
TAPE, MD, DAT/ VIDEO,
ADAPTOR: 150 mV, 2 kilohms
HEADPHONES: 25 milliwatts
at 8 ohms, Accepts low and
high impedance headphones.
Tone controls
BASS: +7 dB at 100 Hz
TREBLE: +6 dB at 10 kHz
General
System
Pure-complementary SEPP
MOS FET power amplifier
Power requirements
220 - 230 V AC, 50/60 Hz
Power consumption
(German model) 90 W
(other models) 85 W
Mains
1 switched, 175 W max.
Dimensions
Chapter 3: For Your Information
Approx. 310 x 90 x 360 mm (12
1/4 x35/8x 14 1/4 inches)
(w/h/d)
Mass
Approx. 5.5 kg (12 lb 2 oz)
Supplied accessories
Remote commander RM-Si (i)
Sony SUM-3 (NS) (2)
Audio bus cable (1)
The above values are mesured at 230 V AC.
(Models for European countries.)
Design and specifications are subject to
change without notice.
See
ee
ere
Index to Parts and
Controls
Front Panel
[1] Remote sensor
[2] ON/STANDBY indicator (7)
POWER switch (7)
HEADPHONES
jack (7)
BASS control (7)
TREBLE control (7)
BALANCE control (7)
FUNCTION control (7)
SOURCE DIRECT control (7)
ATTENUATOR control (7)
(0) oo] /N] fo]
[e [Ile
—
io
Ph)
emote Commander
11
mE}
OD )] 1] Bs)
09)
[ND]
00
13}
co
=
MUTING button (7)
SOURCE DIRECT button
FUNCTION button
Each time you press FUNCTION, the
function changes as follows:
DAT/VIDEO > MD > TAPE - CD
>
TUNER > PHONO ~-...
In
[es]
>.
Cassette deck operating buttons
<I (reverse side play)
[> (upper side play)
Mi (stop)
</P> fast leftward / rightward)
(AMS*)
[5] Tuner operating buttons
SHIFT: Each time you press SHIFT, the
letter (A - C) changes as follows:
A>BOC-...
PRESET —/+: Press - or + to select the
number (0 - 9).
6| CD operating buttons
[= (play)
Hl (pause)
@ (stop)
Ke / PI (AMS*)
7| Tuner/CD numeric buttons
8| Tape control buttons
@ REC (recording)
O REC MUTE (recording mute)
Ill (pause)
9} CD control buttons
CHECK: Press the button to check the
programme.
CLEAR: Press the button to erase a
specific track.
CONTINUE: Press the button to play
tracks continuously.
SHUFFLE: Press the button to play
tracks in random order.
PROGRAM: Press the button to play
tracks in the desired order.
REPEAT: Press the button to play tracks
repeatedly.
T{ME: Press the button to change the
time to be displayed.
MD control buttons
[> (play)
HE (pause)
@ (stop)
Ke / Pi (AMS*)
SYSTEM POWER switch (8)
2} TUNER/CD switch
113} ATTENUATOR
+/-— buttons
=|
=
*AMS: Automatic Music Sensor
Advertisement
Table of Contents
