Table of Contents
Advertisement
Adjusting the speaker volume
The test tone feature lets you set the volume of your
speakers to the same level. (If all of your speakers have
equal performance, you don't have to adjust the
speaker volume.)
Using the controls on the remote lets you adjust the
volume level from your listening position.
1
Press SURROUND T.TONE on the remote.
You will hear the test tone from each speaker
sequentially.
2
Adjust the volume level so that the test tone from
each speaker is at the same level from your
listening position.
• To adjust the level of the center speaker, press
LEVEL CENTER + or – on the remote.
• To adjust the level of the rear speakers, press
LEVEL REAR + or – on the remote.
3
Press SURROUND T.TONE on the remote to turn
off the test tone.
You can also adjust the center or rear speakers using
the controls on the amplifier
1 Press DOLBY to turn on the Dolby Pro Logic mode.
The DOLBY PRO LOGIC indicator lights up.
2 Press CENTER or REAR. The CENTER or REAR
indicator lights up.
3 Press + or – to adjust the level.
Notes
• The center and rear levels, and balance are indicated on
the level meter in the display during adjustment.
• The center and rear levels are adjustable in the following
situations.
Center level: when the Dolby Pro Logic is on (when the
DOLBY PRO LOGIC indicator is lit)
Rear level:
when the SURROUND MODE (DOLBY,
HALL or SIMULATED) is on
You can adjust all speakers at one time
Adjust MASTER VOLUME on the amplifier.
Using Sound Fields
Adjusting the delay time
You can make the surround sound more effective by
delaying the output from the rear speakers (delay
time). You can adjust the delay time as follows.
"
20 ms
"
30 ms
For example, if you've placed the rear speakers in a
large room or apart from your listening position, set
the delay time shorter.
1
Start playing a program source encoded with the
Dolby surround sound.
2
Press SURROUND DELAY on the remote
repeatedly to adjust the delay time.
"
15 ms
13
EN
Advertisement
Table of Contents
