Sony TA-AV411 Service Manual

SERVICE MANUAL
TA-AV411
US Model
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8-ohm loads, both channels driven,
from 40 - 20,000 Hz; rated 135 watts per
channel minimum RMS power, with less
than 0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
Power bandwidth (IHF)
30 Hz — 30 kHz (8 ohms)
Dynamic headroom 1.7 dB ('78 IHF)
Harmonic distortion Less than 0.9% at rated output
(Surround OFF)
Frequency response PHONO: RIAA equalization curve
CD, VIDEO, TUNER, TAPE:
30 Hz ~- 30 KHz +3dB
15 W + 15 W (8 ohms)
27 (8 ohms, 1 kHz)
Surround output
Damping factor
Input
Input jack | J@Ck | Sensitivity | Impedance | S/N (weighting
_type network, input level)
71 dB
PHONO Phono | 3.0 mV 50 kohms_ | 75 dB"
(A, 3.0 mV)
CD,VIDEO,
92 dB
TUNER, Phono | 250 mV 50 kohms- | 83 dB"
TAPE (A, 250 mV)
"78 IHF
Output
TAPE Phono jacks Voltage 150 mV
(REC OUT) Impedance 1 kohm
SPEAKERS Accepts speakers of 8 - 16
ohms
HEADPHONES | Stereo phone Accepts low and high
jack impedance headphones.
GRAPHIC EQUALIZER controls
Boost/Cut range:
+8 dB (100 Hz, 330 Hz, 1 kHz, 3.3 kHz)
+6 dB (10 kHz)
General
Power requirements
120 V AC, 60 Hz
Power consumption
250 W
3 switched, 120 V/1 A max.
Approx. 430 x 145 x 360 mm (w/h/d)
(17 x 55/g x 141/, inches)
Weight Approx. 9.9 kg (21 Ib 14 02}
Accessories supplied
Remote Commander RM-U212 (1)
Sony batteries SUM 3(NS) (2)
AC outlets
Dimensions
Design and specifications subject to change without notice.
INTEGRATED STEREO AMPLIFIER
SONY.