Canon iRC5185 Series Manual page 54

2
IMPORTANT
Make sure to use the same paper size for the cover and the main document.
You can select Heavy 2 paper only if you are not printing on the cover.
Only 64 to 105 g/m
Paper of the following weight can be used as a cover sheet:
- If printing on the cover: 64 to 209 g/m
- If not printing on the cover: 64 to 253 g/m
NOTE
If you are setting the paper for the cover page in the paper drawer, you must load the
paper face up.
If you are setting the paper for the cover page in the stack bypass, you must load the
paper as follows:
- Plain, Recycled, Color, Bond, Heavy 1: face up
- Heavy 2:
4
2-34
Printing with Edit Job Ticket
If you pressed [Add cover], press [Next]
cover.
Press [Next] select the paper source to use for the cover page
[OK].
If you selected the paper to use for the cover from [Stack Bypass Settings],
select the paper type
2
paper can be used for the main document.
Press [Done].
select whether to print on the
press [OK].
2
2
face down
press