Handlebar Switches - Yamaha YFM45KDXK Owner's Manual

If a problem is detected in any of those circuits,
the engine trouble warning light will come on or
flash. If this occurs, have a Yamaha dealer check
the vehicle.
ECB01181
NOTICE
To prevent engine damage, be sure to consult
a Yamaha dealer as soon as possible if this oc-
4
curs.
EBU18067

Handlebar switches

1
2
3
1. Light switch " /
2. Engine stop switch "
3. Start switch " "
/OFF"
/ "
1. On-Command drive switch "2WD/4WD"
EBU18081
Engine stop switch "
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
4-6
/ "
" before starting the engine.
".