V-Belt Cooling Duct Check Hose - Yamaha YFM45KDXK Owner's Manual

1
1. Gasket
2. Spark arrester
3. Tailpipe
4. Tailpipe bolt
8
EWB02342
WARNING
Always let the exhaust system cool prior to
touching exhaust components.
Do not start the engine with the spark arrester
removed. Sparks or exhaust particulate can
cause eye injury, burns, or start a fire.
1. Remove the tailpipe bolts.
2. Remove the tailpipe by pulling it out of the
muffler, and then remove the gasket.
4
2
3
4
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
4. Check the gasket for damage. Replace if nec-
essary.
5. Install the gasket onto the tailpipe, then insert
the tailpipe into the muffler and align the bolt
holes.
6. Install the bolts and tighten to the specified
torque.
Tightening torque:
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
EBU23921

V-belt cooling duct check hose

If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.
8-36