Operation; Starting The Engine - Yamaha YFM45KDXK Owner's Manual

Table of Contents

Advertisement

EBU19874
EWB00012
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
EBU19902
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
EWB00632
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU30564

Starting the engine

This model is equipped with an ignition circuit cut-
off system. To enable starting one of the following
conditions must be met:
 The drive select lever is in the neutral or park po-
sition.

OPERATION

 The rear brake lever or brake pedal is applied.
TIP
It is recommended to shift into neutral or park and
apply the rear brake when starting the engine.
ECB00151
NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
To start the engine
1. Turn the key to "
switch to "
 The coolant temperature warning light and
the engine trouble warning light should
come on for a few seconds, then go off.
 For EPS-equipped models, the electric
power steering warning light should come
on and stay on until the engine is started.
6-1
" (on) and the engine stop
" (run).
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kodiak 450Yfm45kdhkYfm45kpxkYfm45kplkYfm45kphk

Table of Contents