Replacing The Air Filter Element And Cleaning The Check Hose - Yamaha MT-03 2021 Manual

Periodic maintenance and adjustment
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
4. Install the reservoir cap, and then
install the coolant reservoir cover
by installing the bolts.
Changing the coolant
The coolant must be changed at the in-
7
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.
WARNING! Never attempt to remove
the radiator cap when the engine is
hot.
[EWA10382]
Replacing the air filter ele-
ment and cleaning the check
hose
1
The air filter element should be re-
placed at the intervals specified in the
periodic maintenance and lubrication
chart. Replace the air filter element
more frequently if you are riding in un-
usually wet or dusty areas. In addition,
the air filter check hose must be fre-
quently checked and cleaned if neces-
sary.
To replace the air filter element
EAU33032
1. Left side panel
2. Bolt
7-13
1. Remove the rider seat. (See page
4-18.)
2. Remove the left side panel bolts.
1
3. Remove the left side panel by re-
moving the lower projection on the
panel from the slot, and then re-
moving the upper projection as
shown.
EAUN1172
2